Makita DLX2371TJ 18V 5.0Ah Li-ion Cordless Brushless 2pce Combo Kit
Makita DTW1002Z 18V Li-ion Cordless Brushless 1/2" Impact Wrench - Skin Only
The Makita 18V Brushless 1/2" Impact Wrench, DTW1002Z, is the newer compact and lightweight model - having a extra high max tightening torque of 1,000Nm at 6 seconds after seating. With the high powered brushless motor and new impact mechanism, its excellent performance makes this model as powerful as an AC model. Twin LED lights on the front of the drill with preglow and afterglow functions allow you to work in the darkest conditions, and the 3 stage impact power selection gives this tool versability for different jobs around the workplace.
Features:
- BL Brushless Motor, providing more power and longer run times
- Best possible ergonomic handle
- Twin LED joblight, with pre glow and after glow functions
- Rubber joint construction, suppresses the transmission of vibration to battery terminals
- Hammer case securely fastened with 4 bolts
- Easy to operate, push button type F/R change switch
- Variable speed control - 3 stage impact selection, reduces both rpm and fastening torque
Specifications:
- Voltage: 18V
- Capacity:
- Standard bolt: M12 - M30
- High tensile bolt: M10 - M24
- Impact Rate:
- 1st Gear: 2200ipm
- 2nd Gear: 2000ipm
- 3rd Gear: 1800ipm
- Max Fastening Torque:
- 1st Gear: 1000Nm
- 2nd Gear: 500Nm
- 3rd Gear: 300Nm
- Max nut busting torque: 1600Nm
- No Load Speed:
- 1st Gear: 1800rpm
- 2nd Gear: 1000rpm
- 3rd Gear: 900rpm
- Dimensions (L x W x H): 229mm x 91mm x 289mm
- Weight: 3.7kg
Warranty:
- 3 Years Warranty Covered By Makita Australia
Makita DTW300Z 18V Li-ion Cordless Brushless 1/2" Impact Wrench - Skin Only
Features:
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- 4 Stage power selection for optimum rpm and fastening torque
- 330Nm of Max Torque and 580Nm of Nut-Busting Torque
- XPT technology that protects against dust & moisture
- LED Job light with pre-glow and after-glow functions
- Compact and ergonomic design at only 144mm long
Specifications:
- Voltage: 18V
- Max. capacities standard bolt: M10-M20
- Max. capacities high tensile bolt: M10-M16
- No load speed: Hard: 0-2,600rpm
- Impact rate: 0-3,200/0-2,600/0-1,800/0-1,000
- Max. fastening torque: 330Nm
- Drive shank: 12.7mm (1/2”) Square
- Length: 144mm
- Weight: 1.8kg
Warranty:
- 3 Years Warranty Covered By Makita Australia
Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 66% more run time per charge compared to BL1830
- Fast 45 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
- Voltage: 18V
- Amp hour: 5.0Ah
- Cell type: Lithium-Ion
- Charging time: 45 minutes
- Weight: 0.6kg
Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger
Features:
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
Specifications:
- Voltage: 18V
- Cell capacity: 1.5Ah - 6.0Ah
- Charge Time:
- 1.5Ah: 15mins
- 3.0Ah: 22mins
- 4.0Ah: 36mins
- 5.0Ah: 45mins
- 6.0Ah: 55mins
- Length: 185mm
- Weight: 0.82kg
Warranty:
- 2 Years Warranty Covered By Makita Australia
Makita 197053-9 Makpac Connector Carry Case System - Type 4
The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.
Features:
- Stackable for storage and easy transportation
- Strong and collapsible handles
- Four different sizes to choose from
To suit:
- Makita 5008MG 1800W 210mm (8-1/4") Circular Saw
- Makita BHR242/DHR242 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
- Makita BHR243/DHR243 18V Li-ion Cordless Brushless SDS Plus Rotary Hammer
- Makita BHR262 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
- Makita HR262T 36V Li-Ion Rotary Hammer Drill
- Makita RP1800 1850W 12mm (1/2") Plunge Router
- Makita RP2301FC 2100W 12mm Plunge Router
- Makita RT0700C 710W 6.35mm (1/4") Router
- Makita SP6000 1300W 165mm (6-1/2") Plunge Cut Circular Saw
Specifications:
- Type: 4
- Dimensions (L x W x H): 395mm x 295mm x 315mm
- Weight: 2.3kg