Makita 40V Max 40mm SDS Max Brushless Rotary Hammer 4.0ah Set HR005GM201
Description
**Features:**
* Anti Vibration Technology (AVT) - extremely low vibration is achieved by 4 active vibration absorbing mechanisms. A counterweight, vibration absorbing rear handle, anti vibration side grip and rubber joint construction.
* Soft No Load - motor speed reduces to idle when there is no load placed on the bit, in order to preserve battery and allow the user to accurately land the bit on the material.
* Constant Speed Control - motor speed and chipping efficiency is maintained under load. Motor speed stays constant even under load.
* Twin LED Job light - with pre glow and after glow functions illuminating the work area for greater convenience.
* Dual Mode Operation - with both rotation and hammering for drilling in masonry and hammering only for chipping applications.
* Active Feedback Sensors (AFT) - active feedback sensors shut down the tool in the event of a kickback, providing the user with increased safety during operation.
* Variable Speed Trigger & Dial - impacting power can be adjusted by switch trigger and speed dial according to specific application requirements.
* Auto Start Wireless System (AWS)* - compatible with AWS the rotary hammer can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
* eXtreme Protection Technology (XPT) - is an advanced series of seals and channels to direct dust and moisture away from critical components ensuring the durability of the product in the toughest conditions.
**Specifications:**
---
Voltage| 40 V Max
Chuck type| SDS Max
Impact energy| 8.0 j
No Load Speed| 250 - 500 rpm
Impact rate| 1,450 - 2,900 ipm
Sound Pressure| 91 dB(A)
Vibration| 5.0 m/s²
Length| 520 mm
Weight| 6.9 kg
Makita 40V Max 4.0Ah Battery (BL4040) 191B26-6
**Features:**
* Built tough - High durability features specifically designed for XGT
* Shock absorbing structure
* High Rigidity Battery Rails - Durable slide in battery rail holds the battery and tools firmly to withstand high powered products
* Terminal shot-circuit prevention structure - The protection wall is positioned between terminals to protect them from water and dust
* Triple-layer Waterproof Structure - Prevents cell failure due to water and dust
**Specifications:**
---
Voltage| 40V Max
Amp| 4.0 Ah
Weight| 1.0 kg
Makita 40V Max Rapid Charger (DC40RA) 191E09-4
**Features:**
* Optimum Charging System - Rapid optimum charge is achieved by feeding real time data of the battery being charged with the charging control system. Data such as battery condition and cell temperature are communicated to optimise the charge.
* Dual cooling fans - One for the battery and one for the charging circuit. This enable the charger to fully charge all batteries in the same charging time without slowing down due to a heat increase.
* New charging status indicator light - The enlarged and raised LED light provides clearer indication of charging status.
* Compatible with LXT Li-Ion Batteries - ADP10 was developed for use with the DC40RA to rapid charge 18V batteries faster then ever before.
**Specifications:**
---
Voltage| 40V Max
Charge time| 45 mins (BL4040)
28 mins (BL4025)
40 mins (BL1860B using APD10)
Weight| 1.0 kg
Side Grip Assembly, D-Handle Assembly, Bit Grease, Depth Gauge, Cleaning
cloth, 2x 40V Max 4.0Ah Batteries (BL4040), 40V Max Single Port Rapid Charger
(DC40RA), Plastic Case